• Industry Power
  • Problem Corrosion / Erosion
  • Country Chile
  • Project Goal

    Eliminate Corrosion

  • Products Used CeramAlloy CL+AC and CeramAlloy CP+AC
  • Status Completed

These wicket gates for a Francis turbine, used in the hydroelectric industry, direct high flowing water so it hits the blades of the turbine at the most efficient angle. They suffer from constant erosion / corrosion when they are not protected properly. Most companies would toss worn wicket gates into their ‘bone yards’ and buy very expensive new gates for their turbines. ENECON contacted to prescribe a more cost effective and fast solution. It was decided to prepare the surfaces by grit blasting to remove all of the fatigued and corroded metal. CeramAlloy CP+AC was then used to rebuild the gates. CeramAlloy CL+AC, in gray, was applied as a first coat followed by CeramAlloy CL+AC, in blue, as the second and final coat.

METALCLAD CeramAlloy CP+AC is a two component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of fluid flow equipment. For more information about METALCLAD CeramAlloy CP+AC please visit: METALCLAD CeramAlloy CP+AC

METALCLAD CeramAlloy CL+AC is a 100% solids, two component, liquid polymer composite used for repairing, resurfacing and coating components to provide outstanding fluid flow erosion and corrosion resistance. For more information about METALCLAD CeramAlloy CL+AC please visit: METALCLAD CeramAlloy CL+AC

Before Work

After Cleaning

After Work