ENECLAD CFS

SEAL & DUSTPROOF CONCRETE WITHOUT ANY ODOR.

ENECLAD CFS is a two-component, 100% solids, clear concrete sealer that is virtually odor-free and has no V.O.C.’s. It has been specifically formulated to provide outstanding sealing and dust-proofing for all types of cement and mineral substrates.

ENECLAD CFS is very easy to apply by roller, brush or rubber squeegee. It penetrates and seals porous concrete providing a hard wearing, non-dusting, easy-to-clean surface.

ENECLAD CFS exhibits excellent abrasion and impact resistance. It holds up to most industrial cleaners, lubricants and common maintenance chemicals.

  • No Odor
  • 100% Solids
  • Easy to Clean
  • Excellent Abrasion & Impact Resistance
  • Safe and Simple to Use
  • concrete & wood
  • marble & quarry tiles
  • stone & slate
  • brick & terrazzo
  • metal & pavers

Related Images

Technical Data

  • 55 in3 / 900 cc
  • 0.040 lbs per in3 / 1.11 gm per cc
  • 125 ft2 / 11.6 m2
  • Indefinite
  • 100%
Mixing ratio Base Activator
By Volume 2 1
By Weight 2.4 1

Working Life and Cure Times

Ambient Temperature Working Life Light Load Full Mechanical
41°F 5°C 2 hrs. 3 days 7 days
59°F 15°C 40 min. 10 hrs. 3 days 
77°F 25°C 20 min. 5 hrs. 2 days
86°F 30°C 15 min. 3 hrs. 1 day

Physical Properties

Typical Values Test Method
Compressive strength 14,000 psi 980 kg/cm2 ASTM D-695
Flexural strength 9,500 psi 665 kg/cm2 ASTM D-790
Hardness - Shore D 80 ASTM D-2240
Tensile Shear Adhesion      
Steel 3,000 psi 210 kg/cm2 ASTM D-1002
Adhesion - to prepared cementitious surfaces is greater than the cohesive strength of the substrate.

Chemical Resistance

Acetic acid (0-5%) G Methyl alcohol G
Acetone G Methyl ethyl ketone G
Ammonia solution (0-10%) EX Nitric acid (0-10%) G
Aviation fuel EX Palmitic acid EX
Butyl alcohol G Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol G
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-50%) G
Hydrochloric acid (0-10%) EX Tannic acid EX
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Transformer oil EX
Lactic Acid G Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Related Projects