CeramAlloy HTP

REPAIR & REBUILD ALL TYPES OF EQUIPMENT – EVEN AT ELEVATED TEMPERATURES!

METALCLAD CeramAlloy HTP is a two component, 100% solids polymer composite specifically formulated to rebuild and repair all types of fluid flow equipment that may be subject to elevated temperatures.

  • Trowelable
  • Requires No Heat
  • Unlimited Shelf Life
  • 100% Solids
  • Safe & Simple To Use
  • Heat Exchanger & Scrubbers
  • Pumps & Stacks
  • Valves & Pipework
  • Housings & Tanks
  • Drum Dryers
  • Tube Sheets & Water Boxes
  • Distillation Units

Technical Data

  • 38 in3 / 629 cc
  • 0.057 lbs per in3 / 1.59 gm per cc
  • 152 in2 / 0.098 m2
  • Indefinite
  • 100%
Mixing ratio Base Activator
By Volume 2.3 1
By Weight 5 2

Chemical Resistance

Ammonia (5%) EX NaCl (5%) EX
HCL (20%) G Sulfuric acid (98%) G
Motor oil EX Sulfuric acid (50%) EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Temperature Guidelines

Up to:

Dry - 520°F / 270°C

Wet - 330°F / 165°C

We would always recommend that elevated temperature applications be discussed with your local ENECON Fluid Flow Systems Specialist.

Working Life and Cure Times

Ambient Temperature Working Life Machining Light Load Full Mechanical Chemical Immersion
59°F 15°C 1.5 hrs 20 hrs. 48 hrs. 5 days
77°F 25°C 40 min. 10 hrs. 18 hrs. 3 days
86°F 30°C 25 min. 7 hrs. 15 hrs. 2 days

Physical Properties

Typical Values Test Method
Compressive strength 12,500 psi 875 kg/cm2 ASTM D-695
Flexural strength 8,500 psi 595 kg/cm2 ASTM D-790
Hardness - Shore D 87  
Tensile Shear Adhesion    
Steel 4000 psi 280 kg/cm2 ASTM D-1002
Copper 2500 psi 175 kg/cm2 ASTM D-1002
Stainless Steel 3500 psi 246 kg/cm2 ASTM D-1002

Related Projects