Superbond

Before

After

ULTRA HIGH-PERFORMANCE STRUCTURAL ADHESIVE.

UNIVERSAL SURFACE BONDING AGENT.

ENECLAD SuperBond is a revolutionary structural adhesive that provides unrivaled performance when bonding a new concrete overlay to an existing, cured concrete surface or when bonding synthetic/plastic mortars to virtually any rigid surface. When used to bond new concrete to old, the strength of the resultant bond is many times greater than that of monolithic concrete!

SuperBond is a 100% solids, two-component, high performance polymer composite exhibiting extraordinary adhesion to smooth concrete, tile, stone, brick, block, terrazzo, marble, metal, wood and even glass! SuperBond is great for improving the adhesion of conventional structural caulking materials used in expansion and control joints.

As a universal bonding agent, SuperBond is ideal as a bond coat for many types of conventional paint systems or for surfaces that are traditionally difficult to coat – galvanizing, glazed ceramic tile, glass, stainless steel, and aluminum.

SuperBond can even be used as a bonding agent for permanent immersion applications such as in swimming pools or on ships’ hulls. It cures chemically, transforming the bond-line into a highly durable, waterproof film.

ENECON Corporation is a qualified supplier to the U.S. Department of Defense. We’ve been supplying high performance polymer composites to the U.S. Navy for many years. ENECLAD SuperBond is a direct result of our on-going research and development efforts to provide the finest polymer systems for some of the toughest industrial and commercial applications.

ENECLAD SuperBond creates a strong, durable and waterproof seal between cement and mortar, mortar and metal, even mortar and ceramic tile – the glazed side!

  • No Odor
  • 100% Solids
  • Excellent Abrasion & Impact Resistance
  • Outstanding Adhesion
  • Safe and Simple to Use

Related Images

Technical Data

  • 40-45 ft2 / 4 m2
  • Indefinite
Mixing ratio Base Activator
By Volume 5 1
By Weight 10 1

Working Life and Cure Times

Ambient Temperature Working Life Light Load Full Mechanical
50°F 10°C 4 hrs. 24 hrs. 10 days
59°F 15°C 90 min. 14 hrs. 7 days
77°F 25°C 45 min. 8 hrs. 4 days
86°F 30°C 25 min. 4 hrs. 3 days

Physical Properties

(ASTM D- 4541) Direct Tensile Adhesion to: Bond Strength (psi) Failure Mode
*Unblasted Carbon Steel 1500 Stud and panel adhesive failure
*Unblasted Stainless Steel 1400 Stud and panel adhesive failure
*Unblasted Galvanized Steel 800 Panel adhesive failure
*Smooth Plate Glass 1500 Glass cohesive failure
*Unblasted Aluminum 1400 Stud and panel adhesive failure
*Cured Epoxy Coating 1000 Stud, coating and panel adhesive failure
*Glazed Ceramic Tile 700 Tile cohesive failure
Dry Concrete 400 Concrete cohesive failure
Damp Concrete 400 Concrete cohesive failure
*Vinyl Tile 500 Vinyl tile cohesive failure
*Wood 800 Wood cohesive failure
*Substrates were prepared with only an acetone wipe.

Related Projects